Ffmpeg extract last frame

Ffmpeg - bei Amazon

Über 7 Millionen englischsprachige Bücher. Jetzt versandkostenfrei bestellen Use ffmpeg -sseof -3 -i input -update 1 -q:v 1 last.jpg This will seek to the last three seconds of the input and output all frames. But since -update 1 is set, each frame will be overwritten to the same file, leaving only the last frame remaining ffmpeg -sseof -3 -i file -vsync 0 -q:v 31 -update true out.jpg -sseof seeks from the end - I've used a value of 3, to account for files with longer audio streams. -update is an image2 muxer option which tells ffmpeg to overwrite the output file. So the last time the output will be overwritten is when the last frame is processed

FFmpeg : How to get last frame from a video - Super Use

  1. I'm not super familiar with FFMPEG, but the easiest way I can see to accomplish your goal is to first extract the last frame to an image, make a video of a few seconds and then run an encode that concatenates the main video and your newly created video in one pass
  2. Use the FFmpeg executable with the seek option. You'll need to convert to a time first, e.g. if I want frame 150 and my video is 29.97 FPS the command will be ffmpeg -ss 00:00:05.01 -i myvideo.avi -frames:v 1 myimage.jpg. This might be slightly inaccurate. To seek by exact frame you'd need to use the FFmpeg library with C++
  3. Extract all frames from a movie using ffmpeg. Raw. ffmpeg_frames.sh. # Output a single frame from the video into an image file: ffmpeg -i input.mov -ss 00:00:14.435 -vframes 1 out.png. # Output one image every second, named out1.png, out2.png, out3.png, etc. # The %01d dictates that the ordinal number of each output image will be formatted.
  4. ffmpeg -ss 0.5 -i inputfile.mp4 -vframes 1 -s 480x300 -f image2 imagefile.jpg. The various options:-vframes 1: limit to 1 frame extracted-ss 0.5: point of movie to extract from (ie seek to 0.5 seconds; you can also use HH:MM:SS.ZZZZ sexagesimal format)-s 480x300: frame size of image to output (image resized to fit dimensions)-f image2: forces.
  5. You can specify the duration of the required clip using the -t parameter. For example, -ss 40 -t 10 instructs FFmpeg to extract 10 seconds of video starting from the 40th second
  6. When using the fps filter to extract frames be aware that if the input frame rate: is the same as the fps value then the filter is doing nothing and you can remove it. is higher than the fps value then some frames will be omitted to match the fps value. If this is the case then use fps before scale and the process will be faster
  7. imized. Sign in to view. This comment has been

To force the frame rate of the output file to 24 fps: ffmpeg -i input.avi -r 24 output.avi. To force the frame rate of the input file (valid for raw formats only) to 1 fps and the frame rate of the output file to 24 fps: ffmpeg -r 1 -i input.m2v -r 24 output.avi. The format option may be needed for raw input files 1. quick&dirty solution: save all frames, delete all the frame you don't want,.. (ffmpeg -i Path to input Path to outputfolder\output%d.png, mencoder or Avisynth&Imagewriter, or Virtual Dub should be able to produce the clip->png transition)Pro: works and is relatively fast Contra: high hdd space requirement, needs automated way to delete unwanted image Introduction. I've already published the article Another FFmpeg.exe C# Wrapper using FFmpeg.exe via commandline parameters to extract frame images.But that method didn't satisfy me because it's everything but a clean way. So I started some research for possibilities to pinvoke FFmpeg DLLs directly in .NET and after many disappointing projects which I coulnd't get to work I found FFmpeg. The explanation for the parameters is well describe in trac.ffmpeg.org/wiki/Seeking with FFmpeg: To extract only a small segment in the middle of a movie, it can be used in combination with -t which specifies the duration, like -ss 60 -t 10 to capture from second 60 to 70 Find the best information and most relevant links on all topics related toThis domain may be for sale

Extract final frame from a video using ffmpeg - Stack Overflo

  1. FFmpeg Drive is a GUI - graphical user interface (frontend, wrapper) for the popular command-line video manipulation program ffmpeg. It offers access to certain functions of ffmpeg : * the ability to bind individual frames (images) into a single movie file * the ability to convert movie files from one type (format) into another * the play.
  2. Code: ffmpeg -i video24fps.avs -c:v libx264 -r 24 -b:v 40000k -preset veryslow -profile:v high444 output.mp4. That will encode frames 0-99 (0,-100 means 100 frames starting at 0) The other method to use ffmpeg alone is to know what the frame time is and use -ss to seek to the frame and encode: Code
  3. When we extract just one frame, we can opt out -f image2 from the command above: ffmpeg -i yosemiteA.mp4 -ss 00:00:18.123 -frames:v 1 yosemite.png The command will seek to the position of 0h:0m:18sec:123msec into the movie and extract one frame (-vframes 1) from that position into a yosemite.png file
  4. FFMPEG output is blocky. I'm attempting to extract the individual frames from a raw AVC video stream. I'm doing this via the following ffmpeg command: ffmpeg -q 1 -i video_test.avc -f image2 frames/frames_%04d.jpg. The problem I'm encountering is the first few frames look good. I'm including an example below

Key Frame Seeking. The fastest way to extract a portion of video from a larger video (with a 60 second clip starting 30 seconds in) would be the following: ffmpeg -ss 30 -i input_vid.mp4 -t 60 -c copy output_clip.mp4. This method is so fast because it uses Key frames when performing seek, and there are far fewer Key frames than Predicted frames Last edited 9 years ago by And there is a second possibility how not to extract non-keyframes: $ ffmpeg -ss 1 -i mpeg2video_seek_to_non_keyframe.mpg -vcodec copy -vframes 1 out.m2v after the seek and ffmpeg keeps reading until it gets a keyframe packet and the decoder finally returns a full frame. I get:./ffmpeg -ss 1 -i ~/mpeg2video. FFMPEG -vf does not extract first frame. 0. I am running the following command to extract frames at a rate of 1 per second. This works fine, except that the first extracted frame is not the first frame of the video, but the frame after 1 second of video. ffmpeg -i input.mp4 -f image2 -vf fps=1 ./out_%01d.jpg You can use ffmpeg. ffmpeg -loglevel quiet -ss 26 -i sample-video.mp4 -t 1 -f image2 anyfilename.jpeg -loglevel set the logoutput to quiet because ffmpeg is very chatty-ss is seek (in seconds, i.e. where you want to take the snapshot) -i input video file -t timeframe of the snapshot (in seconds) -f filetyp Since the ffmpeg command-line tool is not ready to serve several clients, the test ground for that new API is an example program serving hard-coded content. The last and most ambitious part of the project was to update ffserver to make use of the new API

How to hold the last frame when using ffmpeg - Video

  1. Colab—# ffmpeg extract #115. oghaki opened this issue on Nov 7, 2020 · 3 comments · May be fixed by #116. Comments. AlphaGit linked a pull request that will close this issue on Nov 7, 2020
  2. Note that in ffmpeg, Each submitted frame except the last must contain exactly frame_size samples per channel. May be 0 when the codec has CODEC_CAP_VARIABLE_FRAME_SIZE set, in that case the frame size is not restricted. Extract the core from a DCA/DTS stream, dropping extensions such as DTS-HD. 13.5 dump_extra
  3. FFMediaToolkit 4.0.0. FFMediaToolkit. Cross-platform audio/video processing library based on FFmpeg native libraries. Supports audio/video frames extraction (fast access to any frame by timestamp), reading file metadata and encoding media files from bitmap images and audio data. Package Manager. .NET CLI
  4. Use the scale filter to specify the width of the GIF, the -t parameter specific the duration while -r specifies the frame rate (fps). ffmpeg -i video.mp4 -vf scale=500:-1 -t 10 -r 10 image.gif. 8. Extract image frames from a videoThis command will extract the video frame at the 15s mark and saves it as a 800px wide JPEG image

Part 2. Trim Video with FFmpeg Alternative; Part 1. How Does FFmpeg Trim Videos. As a matter of fact, FFmpeg uses the Seeking command to help you find a designated section from your input video and extract it off or trim out a part. The following command line is used to trim video in FFmpeg, which is fast and adopts Key Frame to seek I then use ffmpeg to extract 20 seconds of audio, with the following command: ffmpeg.exe -i st6.mkv -acodec copy -ss 00:00:00.0 -c copy -t 00:00:20.0 st6.opus ffmpeg.exe -i st6.mkv -acodec copy -ss 00:00:00.0 -c copy -t 00:00:20.0 st6.mka The MKA file crackles at two points, whereas the Opus file does not. st7.mka/opu Extract last frame of a video file. GitHub Gist: instantly share code, notes, and snippets This short tutorial will demonstrate how to extract the last N seconds from a video (like removing the last 10 seconds of a video using FFmpeg). To do this we will make use of the -sseof option by FFmpeg.This is useful in video editing, where you might want to remove the credits section or slates that have been burned into the video Then we slow down and seek frame by frame to the third minute. This works because ffmpeg will first seek by keyframes, until it reaches 00:02:30. This is where it stops at the last keyframe found (somewhere before 00:02:30, depending on the GOP size/keyframe interval of the input) and then it will slowly seek the next 00:00:30 seconds to the.

frame= 1 fps=0.0 q=2.1 Lsize=N/A time=00:00:00.04 bitrate=N/A speed=0.479x video:19kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown Input file #0 (1.ts) Motion Vector Extractor. This tool extracts frames, motion vectors, frame types and timestamps from H.264 and MPEG-4 Part 2 encoded videos. This class is a replacement for OpenCV's VideoCapture and can be used to read and decode video frames from a H.264 or MPEG-4 Part 2 encoded video stream/file. It returns the following values for each frame Passing arguments to a node.js package.json bin command or debugging a bin command? I would like to launch a bin command in debug modeBut I can't seem to write --inspect-brk=3000 as an argument as it only wants to accept a filename and npm link checks if file exist In order to get the last frame of a video, we first have to know what is it's length in hours, minutes and seconds. FFMpeg can also help us with that. We will take a dummy thumb from the video, by doing it, FFMpeg will write to the standard output the video information. We will use simple regular expression to extract the length of the video. Last modified 10 years ago #92 closed I've been asked several times if we could make the ffmpeg command line tool able to extract all key frames from a video. the abovementioned -vf parameter needs to be coupled with the -vsync 0 parameter if one wants to extract all key frames from a video without duplicates, as is the idea behind.

Summary of the bug: When transoding/reencoding video ffmepg loses the CC data that was embedded within the actual video stream itself. This type of CC is referred to as EIA-608/EIA-708 and is muxed to the video stream following guidelines in SCTE 128 from my research. If you use '-c:v copy' the CC remains intact and last, the problem could also be the version of ffmpeg. there is a link somewhere for the ffmpeg builds. Quote . 27th Nov 2013 16:02 #8. poisondeathray. And is there possible to make ffmpeg to extract all frames without knowing the video file frame rate extract frames from original video (83 frames) ffmpeg-20140731-110210.log ( 13.4 KB ) - added by MkMs 7 years ago . extract frames from -q 32 video (84 frames

How to extract a frame out of a video using ffmpeg - Super

It's on the manpage: * You can extract images from a video, or create a video from many images: For extracting images from a video: ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg This will extract one video frame per second from the video and will output them in files named foo-001.jpeg, foo-002.jpeg, etc. Images will be rescaled to fit the new WxH values ffmpeg -i video.webm image-%03d.png # This will extract 25 images per second from the file video.webm and save them as image-000.png, image-001.png, image-002.png up to image-999.png. If there are more than 1000 frames then he last image will be overwritten with the remaining frames leaving only the last frame When using ffmpeg with -skip_frame nokey to extract keyframes, only 3 files are produced: % ffmpeg -v0 -skip_frame nokey -i unknown.opengop.mp4 -vsync 0 img-%06d.jpg; ls *jpg | wc -l 3 When using ffmpeg with a video filter to extract I frames, 45 are produced (as expected)

I am trying to extract a single frame from a video using the Qprocess and ffmpeg and store it in a tmp folder. When I run the program in terminal command line it is able to extract it but not when qprocess runs it. kulvi last edited by kulvi The only way to start at specific frames is to convert a number of To cut based on start and end time from the source video and avoid having to do math, specify the end time as the input option and the start time as the output option. ffmpeg -t 1:00 -i input.mpg -ss 45 output.mpg This will produce a 15 second cut from 0:45 to 1:00

Extract all frames from a movie using ffmpeg · GitHu

Extract A Single Image From A Video Using FFMPEG - Rob's Blo

This avoids re-encoding, but you can only cut on key frames, so it may not choose the duration you want. Create segments: ffmpeg -t 00:11:00 -i input.mp4 -map 0 -c copy segment1.mp4 ffmpeg -ss 00:11:10 -i input.mp4 -map 0 -c copy segment2.mp4 Create input.txt: file 'segment1.mp4' file 'segment2.mp4' Concatenate with the concat demuxer If the video has a size of 420x320 pixels, then the first 420x360x3 bytes outputed by FFMPEG will give the RGB values of the pixels of the first frame, line by line, top to bottom. The next 420x360x3 bytes afer that will represent the second frame, etc. In the next lines we extract one frame and reshape it as a 420x360x3 Numpy array 2.6 eac3_core. Extract the core from a E-AC-3 stream, dropping extra channels. 2.7 extract_extradata. Extract the in-band extradata. Certain codecs allow the long-term headers (e.g. MPEG-2 sequence headers, or H.264/HEVC (VPS/)SPS/PPS) to be transmitted either in-band (i.e. as a part of the bitstream containing the coded frames) or out of band (e.g. on the container level). This latter. For this command to work, you need to have many frames where each frame is a file like Penguins - 00043.png. This command will then combine all frames in order at a rate of 30 FPS. So, Penguins - 00043.png comes before Penguins - 00044.png in the video and ffmpeg will respect that ffmpeg -i crushed-between-two-portals.mp4 %d.jpg but if I run this command [2]: ffmpeg -i crushed-between-two-portals.mp4 -vf select='eq(pict_type,I)' %d.jpg I get this result: Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used) I think it is because of the video stream

gif-extract-frames - Extracts frames from GIFs including inter-frame coalescing. ffmpeg-extract-audio - Extracts an audio stream from a media file. ffmpeg-on-progress - Utility for robustly reporting progress with fluent-ffmpeg. ffmpeg.js - Port of FFmpeg to JavaScript via Emscripten. Allows for limited FFmpeg use on the client-side. May 29, 2021 OTTVerse. In this quick tutorial, we'll teach you how to extract the number of frames (of frame count) in a video [] FFmpeg. What is FFmpeg? Usage, Benefits, and Installation Simplified. March 9, 2021 Krishna Rao Vijayanagar. FFmpeg is a free software project that produces libraries and programs for handling and manipulating. Another useful feature of FFmpeg is we can easily extract images from a video file. This could be very useful, if you want to create a photo album from a video file. To extract images from a video file, use the following command: $ ffmpeg -i input.mp4 -r 1 -f image2 image-%2d.png. Here,-r - Set the frame rate. I.e the number of frames to be. Render Animation¶. Render animation allows you to render your animation to an image sequence, .gif, .mp4, .mkv, or .ogg file. It replaces Export Animation.. For rendering to an animated file format, Krita will first render to a PNG sequence and then use FFmpeg, which is really good at encoding into video files, to render that sequence to an animated file format

How to Cut Video Using FFmpeg in 3 Easy Ways (Extract/Trim

How to Remove a Specific Audio Track using FFmpeg. For removing a specific audio track using FFmpeg, you can always use the map command.. The general syntax of the map command is -map input_file_index:stream_type_specifier:stream_index.. So, you could select the 2nd audio track of the video by saying -map 0:a:1 because the numbering starts at 0. In our example, if your file has 1 video track. Extract Single Image from a Video at Specified Frame $ vf [ss][filename][outputFileName] where vf is a custom bash script as follows: $ ffmpeg -ss $1 -i $2 -qmin 1 -q:v 1 -qscale:v 2 -frames:v 1 -huffman optimal $3.jpg ss offset = frame number divided by FPS of video = the decimal (in milliseconds) ffmpeg needs i.e. 130.5. Merge Multiple Video You could use IOUtils.toString () from Apache Commons IO to read an InputStream into a String in To get the response body as a string we can use the EntityUtils.toString () method. This method read the content of an HttpEntity object content and return it as a string. The content will be converted using the character set from the entity object Choose 64-bit or 32-bit, Static, and click on Download Build. Open the ZIP file, open the bin folder and copy ffmpeg.exe, ffprobe.exe and ffplay.exe to a new folder, for example c:\ffmpeg\ That's all. ffmpeg.exe is the very powerful software for manipulating videos

Extract the Mastering Display metadata. First, we need to use FFprobe to extract the Mastering Display and Content Light Level metadata. We are going to tell it to only read the first frame's metadata -read_intervals %+#1 for the file GlassBlowingUHD.mp4. ffprobe -hide_banner -loglevel warning -select_streams v -print_format json -show_frames -read_intervals %+#1 -show_entries frame. After perusing the source, it looked like ffmpeg was capable of making byte-range requests. This is great. Instead of downloading the whole file to extract a single frame, perhaps ffmpeg will only get the parts it needs. Testing the behavior is easy enough. Here's a 36-minute, 1.5 GB video of a yule log (a belated happy holidays!) Last Post: 18th Jun 2021, 17:20. I have been using 'ffmpeg' to extract Audio from Videos. By robertdaleweir in forum Newbie / General discussions Replies: 8 Last Post: 28th Feb 2021, 17:23. Need ffmpeg help. Extract frame every 10 sec and do it in a batch. By widuljewic in forum Newbie / General discussions Replies: 5 Last Post: 16th Jun 2020. This class is a wrapper around the FFmpeg, FLVTools2 and Mencoder programs to allow PHP developers to manipulate and convert video files. It also provides FFmpeg-PHP emulation in pure PHP so you do not need to compile and install the module. It performs several types of manipulation operations that include video format conversion, extract video frames into separate image files, assemble a..

research highlightsPause Video On Last Frame

video - How can l use ffmpeg to extract frames with a

I want to extract all key frames from a video and also include the filename sequence and the timestamp of each frame in the filename. So far, basic key frame extraction with sequence number works fine with this:-i input.mp4 -vf select=eq(pict_type\, PICT_TYPE_I) -vsync 2 output.mp4-%02d.png It outputs the following filenames Bit-Depth: x265: These are the Raw Results for the x265 Encoder. 10-bit is clearly the way to go! As you can see 10bit is the winner, if it comes to quality and Bitrate savings. Here is an Article why it does so: Click. x264: Raw Results for the x264 Encoder. Hmmm

last 100 frames or last 2000 frames or last 999 frame any things are fine - vijayky88 May 24 '18 at 10:39 1 Easy solution would be to seek in the video with ffmpeg -ss 00:01:23 and start from that as an offset Extracting a single frame is easy too: ffmpeg -i input.avi -f image2 -ss 14.342 -vframes 1 frame.png. This will save the frame that is at 14.342s. The fractions in the offset ( -ss) are good for specifying the frame within a second. The tricky part comes, when you want to save a set of frames at equal distances from each other First make it correct, then make it fast¶. extract.py places an emphasis on correctness rather than speed. It uses the ffmpeg program to extract all of the frames in the input video, at the original frame rate. Only then does it select particular frames to copy, or change frame rates. This is because ffmpeg is not totally reliable when you ask it to change rates After google i see you can make FFMPEG to extract frames every x amount of seconds or extract 60 frames per second even if the video plays at 30 frames per second. But what i want is to extract all the frames that originally exist in a video (no extra frames like 60 per second when the video originally has 30), without lose quality, in a. EXTRACT A SINGLE IMAGE FROM A VIDEO USING FFMPEG. If we want to extract a single frame image file from a video, for example to use as a movie poster image use the following command line - ffmpeg -i myvideo.mp4 -vframes 1 -ss 00:00:05 -f image2 image-%3d.jp

Last Frame: A Weddell Seal GigglesThe Inconveniencing | Gravity Falls Wiki | FANDOM powered

Your best bet is to just extract every N th frame, where N is your framerate. If you have a constant integer framerate, this will work. If you have a constant integer framerate, this will work. If you have a timebase offset (23.976 / 29.97), your frames won't line up with the zero mark anyway If GOP=1, every frame can be decoded standalone, without requiring previous or successive frames. If GOP>1, frames inside the GOP require the last previous keyframe (=I-Frame) for proper decoding of the image. 1) Video material can be cut at any point. This is useful for cropping/editing frame-exact 3. Just use what is built into ffmpeg to do exactly this. ffmpeg -i invid.mp4 -threads 3 -vcodec copy -f segment -segment_time 2 cam_out_h264%04d.mp4. This will split it into roughly 2 second chucks, split at the relevant keyframes, and will output to the files cam_out_h2640001.mp4, cam_out_h2640002.mp4, etc. Share

The Interview | SCP Foundation Amino

mkver avcodec: Move all AVCodecParser.split functions to remove_extradata_bsf. The remove_extradata bsf is the only user of these functions. Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com> Signed-off-by: James Almer <jamrial@gmail.com>. * This file is part of FFmpeg. * version 2.1 of the License, or (at your option) any later. Using code to extract frames from a video, move Mp4 into it. apply ffmpeg code (1 line) to extract frames into same Dir. DONE. Testing loop & directory operations only, the following code didn't work. just makes it hang. Last edited by ericlindellnyc; 03-30-2018 at 12:37 PM. Reason: to clarify the question.

FFMPEG - Example - RTSP - Extract frame as PNG.vi - Extracts single frame from network stream, passes it over pipe to LabVIEW and draws it. FFMPEG - Example - RTSP - Extract frame as PPM.vi - Extracts single frame, stamps image with timestamp, frame count and duration. Pipes resulting frame to LabVIEW, converts PPM data to 2D Image array ffmpeg -i input.jpg -vf scale=320:240 output_320x240.png Extract a Portion of a Video. Another very common operation on video files is to extract a specific portion of a given video. This can be done super easily: ffmpeg -ss 00:00:30 -i orginalfile.mpg -t 00:00:05 -vcodec copy -acodec copy newfile.mp FFMPEG is the go to tool for converting video and audio files. It can also be used to crop a video, extract a frame, find the framerate of a video, among other things. It is often used by other media apps as a backend. FFMPEG isn't just for editing videos. It is also a video player Hi all. This is the problem. I have 890Gb of mp4 files (from DAHUA surveillance) and i need img files so i can build time laps. If i try to convert it it will gona take a long time, i just need to use ffmpeg on Windows10, so i can extract every 10 min in one img, and i need it to do it in a batch for all files in directory, around 160 files, each about 1.4 Gb Extract frames from a movie This example extracts the first 2 seconds of a movie in video21.wmv into individual image files. The files will be called img-0001.png, img-0002.png, img-0003.png, etc. It is best to do this in a separate directory. ffmpeg -i video21.wmv -r 30 -t 2 -f image2 img-%04d.pn

[FFmpeg-devel,3/3] avcodec/cuviddec: signal that the decoder sets all output frame properties [FFmpeg-devel,1/3] avcodec/decode: fetch packets from the pkt_props FIFO on every frame returned 4 - Let's run a quick command to convert them into a video. ffmpeg -framerate 30 -pattern_type glob -i folder-with-photos/*.JPG -s:v 1440x1080 -c:v libx264 -crf 17 -pix_fmt yuv420p my-timelapse. In FFmpeg, the following command generates an image file from each frame in a video. The files are numbered with five digits, padded on the left with zeros. ffmpeg -i video.mov -f image2 video-frame%05d.png. More information is available in an FFmpeg tutorial on image sequences. Generating an image sequence has disadvantages: they can be. [FFmpeg-devel] av_frame_get_buffer can be used with channels set. Update end_trimming for the last packet [FFmpeg-devel] avformat/oggparsevorbis: Update end_trimming for the last packet - - - - 2 1 1: 2021-06-21: Guangyu Sun: New [FFmpeg-devel] avformat/av_get_frame_filename2: Add timecode image extract option [FFmpeg-devel] avformat/av_get. Recall that timestamps in streams are measured in frames rather than seconds, with the formula seconds = frames * time_base (fps). avcodec defaults to a value of 1,000,000 fps (so a pos of 2 seconds will be timestamp of 2000000). We'll see why we need to convert this value later. Here's our stream_seek function

Download FFmpeg Batch AV Converter for free. Free all in one audio/video ffmpeg batch encoder. FFmpeg Batch AV Converter is a free universal audio and video encoder, that allows to use the full potential of ffmpeg command line with a few mouse clicks in a convenient GUI with drag and drop, progress information. Some fancy wizards make things easy for non-experts frame type I 19, avgQP 20.00, total size 2.54 MB frame type P 442, avgQP 20.00, total size 12.66 MB frame type B 1723, avgQP 20.00, total size 24.10 MB Total Size 39.3 MB DATA 2 frame type IDR 19 frame type I 19, avgQP 16.00, total size 3.87 MB frame type P 442, avgQP 19.00, total size 15.69 M ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg This will extract one video frame per second from the video and will output them in files named foo-001.jpeg, foo-002.jpeg, etc. Images will be rescaled to fit the new WxH values ffmpeg -i ${input} -acodec copy -y extractedaudio.${codec} esac I have some videos with adpcm_ima_qt audio and other videos with qdm2 audio. Do you or another else have any idea what ffmpeg command would be needed to extract those? I tried various commands and nothing worked · You can extract images from a video, or create a video from many images: For extracting images from a video: ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg This will extract one video frame per second from the video and will output them in files named foo-001.jpeg, foo-002.jpeg, etc. Images will be rescaled to fit the new WxH values. ffmpeg -i input.mov -codec:v copy -bsf:v mjpeg2jpeg frame-%04d.jpg Alternate syntax: ffmpeg -i input.mov -vcodec copy frame-%04d.jpg Extract the best quality of still images from a video. Note, if your video is in MJPEG format then see #MJPEG for even better best quality still image extraction. See the options -qscale:v or the alias -q:v for.